This three-phase AC induction motor is suitable for installation with a conventional automotive multi-speed gearbox in vehicles up to around 1250 kg.

The 1 hour and peak power outputs with an 80V battery are conservatively rated at 7.5kW and just under 22kW, at around 360A peak from the battery.

A cooling fan is included and there is aluminium heatsinking on the case exterior.

It is possible to increase peak power to well over 25 kW by increasing the current and removing the original shaft driven fan, and fitting a fan blower, suitably controlled by the internal thermal sensor or a thermostat control.

These motors are built to order.

The peak efficiency of this motor is similar to a DC motor of similar size, however, in common with many other AC induction motors it tends to achieve higher regeneration efficiency and maintain higher efficiency over a wider rev and load range. With a suitable matched controller, please see AC controllers, the torque can be tailored to achieve a very uniform curve with high stall torque.

Please view performance data here.

Dimensions (approx): See outline drawing details here 

Weight (approx): 45 kg

7.5 kW / 25 kW AC Induction Higher Speed Motor

  • Product Code: M-ACI-C200SHS
  • Availability: Pre-Order
  • £2,028.00

  • Ex Tax: £1,690.00

Tags: 7.5 kW / 25 kW AC Induction Higher Speed Motor